Description
Professional Single-Patient Hard-Shell System
3.0 ATA Hard-Shell Hyperbaric Oxygen Chamber — 31.5-Inch Diameter
Designed for controlled single-user sessions, this steel hard-shell chamber combines selectable pressure settings, internal and external touchscreen operation, integrated cooling, environmental monitoring, and redundant pressure-safety systems in a compact professional configuration.
Pressure Range
1.1–3.0 ATA
10–200 kPa selectable
Interior Size
86″ × 31.5″
Length × interior width
Chamber Weight
485 lb
Approximately 220 kg
Maximum User Weight
550 lb
Approximately 250 kg
Product Overview
Advanced Control, Comfort, and Visibility
The chamber uses a sliding transparent polycarbonate door to support easier entry, clear visibility, and a brighter interior. Touchscreen displays inside and outside the chamber provide access to session time, pressure, and temperature controls. The system also displays treatment progress and monitors interior temperature, humidity, and carbon dioxide levels.
Core Features
Built for Convenient Professional Operation
01
Dual Touchscreen Controls
Internal and external displays allow session settings to be managed from either side of the chamber.
02
Customizable Session Settings
Session time, pressure, and temperature can be adjusted, with automatic depressurization after completion.
03
Smart CO₂ Monitoring
The system monitors carbon dioxide and supports automatic ventilation to maintain the chamber environment.
04
Integrated Air Conditioning
The included cooling system is designed to maintain interior comfort and can cool the chamber to approximately 18°C (64.4°F).
05
Real-Time Environmental Display
A live graph and environmental display show treatment progress, temperature, humidity, and CO₂ readings.
06
Two-Way Communication
An interphone system supports communication between the user and an attendant, including during a power interruption.
07
Wide Transparent Door
The sliding transparent door improves visibility, permits more interior light, and supports easier user access.
08
Expandable Oxygen Connections
Additional oxygen inlet ports are available for compatible expansion or accessory configurations.
Safety Systems
Multiple Layers of Pressure and Operational Protection
✓
Software pressure cut-off: automatic relief if chamber pressure rises above 210 kPa.
✓
Mechanical safety valve: designed to prevent pressure from exceeding 220 kPa.
✓
Emergency interior release: one-touch valve for accelerated depressurization.
✓
Power-failure response: automatic pressure relief if electrical power is interrupted.
✓
Internal pressure gauge: permits pressure observation during the session.
✓
Ground protection: the chamber body is grounded to reduce electrical static impulses.
Technical Information
Product Specifications
| Specification |
Details |
| Intended Capacity |
Single patient |
| Operating Pressure |
10–200 kPa / 1.1–3.0 ATA, selectable in 10 kPa increments |
| Chamber Material |
Steel |
| Interior Dimensions |
86″ L × 31.5″ W |
| Chamber Weight |
220 kg / 485 lb |
| Maximum User Weight |
250 kg / 550 lb |
| All-in-One Air Volume |
100 L/min |
| Electrical Supply |
115 VAC, 50/60 Hz |
| Power Consumption |
950 VA |
| All-in-One System Size |
17.7″ W × 25.3″ D × 43″ H |
| All-in-One System Weight |
94 kg |
| Minimum Installation Area |
118″ W × 59″ D / 3,000 mm × 1,500 mm |
| High-Pressure Oxygen System |
20 LPM at 400 kPa |
| Doorway Clearance |
Chamber body is described as fitting through a 90 cm doorway; detachable handles reduce required clearance to approximately 85 cm / 33.5″ |
Installation and Site Planning
Plan for a minimum floor area of approximately 118 inches wide by 59 inches deep. Before delivery, confirm doorway clearance, electrical requirements, ventilation, oxygen-system placement, floor load capacity, service access, and all local safety or regulatory requirements.
Installation, commissioning, maintenance, and operating procedures should follow the current manufacturer manual and be completed by appropriately qualified personnel.
Frequently Asked Questions
3.0 ATA Chamber FAQs
What is the selectable pressure range?
The listed operating range is 10–200 kPa, equivalent to approximately 1.1–3.0 ATA, selectable in 10 kPa increments.
Can the chamber be controlled from inside and outside?
Yes. The product listing describes touchscreen controls on both the interior and exterior for session time, pressure, and temperature management.
Does the chamber include interior cooling?
Yes. An integrated air-conditioning system is listed and is described as cooling the chamber to approximately 18°C (64.4°F).
How much installation space is required?
The listed minimum floor area is approximately 118 inches wide by 59 inches deep, or 3,000 mm by 1,500 mm.
What doorway clearance should be checked before delivery?
The chamber body is described as passing through a 90 cm doorway. With detachable handles removed, the listed clearance is approximately 85 cm, or 33.5 inches.
<
<!–
OPTIONAL FAQ SCHEMA
Keep this only when your SEO plugin is NOT already generating FAQ schema for these same questions.
WordPress may remove tags from a product description for non-administrator accounts.
If it is removed, add this schema through your SEO plugin, theme header, or a code-snippet plugin.
–>
{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“@id”: “#taimur-hbot-faq-schema”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the selectable pressure range?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The listed operating range is 10–200 kPa, equivalent to approximately 1.1–3.0 ATA, selectable in 10 kPa increments.”
}
},
{
“@type”: “Question”,
“name”: “Can the chamber be controlled from inside and outside?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. The product listing describes touchscreen controls on both the interior and exterior for session time, pressure, and temperature management.”
}
},
{
“@type”: “Question”,
“name”: “Does the chamber include interior cooling?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. An integrated air-conditioning system is listed and is described as cooling the chamber to approximately 18°C (64.4°F).”
}
},
{
“@type”: “Question”,
“name”: “How much installation space is required?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The listed minimum floor area is approximately 118 inches wide by 59 inches deep, or 3,000 mm by 1,500 mm.”
}
},
{
“@type”: “Question”,
“name”: “What doorway clearance should be checked before delivery?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The chamber body is described as passing through a 90 cm doorway. With detachable handles removed, the listed clearance is approximately 85 cm, or 33.5 inches.”
}
}
]
}
Specifications
Specifications of OxyRenew hyperbaric hard chamber
| Hyperbaric Chamber |
Usage :
Operation Pressure :
Size :
Weight:
Material :
Maximum Weight Limit |
One Patient
10~200 kPa (1.1 ~ 3.0 ATA)
86-inch (L) x 31.5 W – interior
220 kg or 485 lbs
Steel
250 kg or 550 lbs |
| All In One System |
Air Volume :
Voltage :
Power Consumption :
Size:
Weight :
Material
Installation Space |
100 L / Min
115 VAC, 50/60 Hz
950 VA
(W) 17.7″ x (D) 25.3″ x (H) 43″
94 kg
Steel
(W) 3000 mm / 118-inches (D) 1500 mm / 59-inches |
